Fujitsu introduces ultra-thin micro SD connector
Using advance technology, new connector has lowest profile for micro SD cards.
Read Press Release |
Get Datasheet
New Waveguide Technology Brings New Application
3D polymer waveguide breakthrough leads to development of a waveguide-based 4-channel optical parallel transceiver.
Read Press Release |
Technical Bulletin
High-Density I/O Module Supports 4x Requirements
The Fujitsu Multi-IO microGiGaCN™ series product supports high speed signal transmission in compact package and easy to install structure. This series of modules incorporates Fujitsu’s world standard high-speed differential 4 channel IO socket interface which is defined by SFF 8470, InfiniBand™, 10G Base-CX4, and 10G Fiber Channel. The module is designed to meet InfiniBand DDR, along with the previously mentioned industry standards, in a 4channel, bi-directional data transfer mode.
The Multi-IO connector module allows for increased I/O port density, while allowing for ease of signal routing on the main pcb.
Read Press Release |
Get Datasheet
We're In the News!
Find out how EETimes' editors and readers rate Fujitsu's x-MGC 10 Gbit Ethernet CX4 module for networking applications.
Differential Right-Angle Connector Allows High-Speed Perpendicular and Coplanar PCB Connections
With the growing popularity of its high-speed MicroGiGaCN connector line, Fujitsu has expanded it with an SMT right-angle plug. Mateable with the line’s straight and right-angle sockets, high-speed perpendicular or coplanar board-to-board connections are now possible.
Tested from 622MB up to 10GB per channel over standard FR-4 material, the RoHS-compliant device meets the current and future signal speed requirements of
InfiniBand®, 10G Ethernet, Serial Attached SCSI™, PCI Express, and SATA2.
Read Press Release |
Get Datasheet
X2 CX4 Copper Module Provides Cost-Effective and Reliable 10Gb Signal Transport
Fujitsu has expanded its offering of CX4 copper modules with the addition of an X2 module featuring a built-in media detect circuit. The X2 module offers a compact, cost-effective and reliable method of bandwidth transport of up to 10Gb for distances of 20m over standard InfiniBand copper cable,
or 300m over standard multi-mode fiber.
Read Press Release |
Get Datasheet
Optical Transceiver Module Boasts Media Converter for Flexibility in the Data Center
Fujitsu offers IT managers a low-cost, flexible way to implement 10G Ethernet data transfer with a new optical transceiver module featuring a built-in
intelligent media converter.
Read Press Release |
Get Datasheet
XENPAK Module Boosts Copper Cable Reach
There’s been a lot of talk lately about expanding copper’s data transfer capabilities to meet increasing bandwidth demands. Now Fujitsu has introduced its x-MGC, a 10Gigabit Ethernet CX4 module that provides a low-cost solution
for signal transfer over copper cabling up to 25 m.
Read Press Release |
Get Datasheet
microGiGaCNTM Connector Series Expands
Adopted in various forms by InfiniBand, 10G CX4 Ethernet, and 10G Fiber Channel standards bodies, the microGiGaCN copper connector series is a proven winner for cost-efficient, high-speed data transfer. That’s why Fujitsu has added yet another configuration: a latching, vertical board-mount I/O socket
in 4x and 12x versions for InfiniBand applications.
Read Press Release |
Get Datasheet
Copper Meets High-Speed, Low-Cost Demands
In many instances, copper interconnects can be a viable, low-cost option to optical fiber for high-speed data transfer.
Read this article to find out how.
microGiGaCNTM High-Speed Copper Connector Series Meets I/O Standard for SA-SCSI, S-ATA and 10G Fiber Channel
Keeping interconnect technology up to speed with ever-increasing data transfer rates is one of Fujitsu’s strengths. That’s why we are the only manufacturer that supplies a full-range of industry-standard, high-speed copper interconnects for various high-performance transport technologies. Our latest addition to our microGiGaCN series is a standard I/O plug with thumbscrews for Serial Attached SCSI 4-lane,
Serial ATA-2 4-lane and 10G Fiber Channel.
Read Press Release |
Get Datasheet
Loop-Back Module Tests High-Speed Systems
Our new loop back module was designed especially for testing signals in high-speed systems. The secret is the internal printed circuit board. It provides ultra-low cross talk and in pair skew to maintain
signal integrity during testing.
Read Press Release |
Get Datasheet
Differential Copper Cables Meet the High-Bandwidth Challenge
As the need for speed increases in datacom applications, Fujitsu’s new high-performance copper cable assembles are a viable, lower cost option to fiber optic cables. The new cable assemblies are compatible with InfiniBandTM,10G Ethernet (CX4), and 10G Fibre Channel specifications, and capable of
transmission speeds up to 3.187Gbps with less than 4% crosstalk.
Read Press Release |
Get Datasheet
Tiny Plastic Ferrules Make Big Impact
Fujitsu announces a new development process to mass-produce plastic ferrules that have the same strength, durability and optical properties of traditional Zirconia ferrules. The new plastic ferrules greatly reduce labor costs and open the door for further
development of cost-effective optical devices.
Read Press Release |
Get Datasheet
New Connector Simplifies High-Speed Differential Data Transfer
Designers of high-speed data-link/LVDS applications just got another boost from Fujitsu’s
matched impedance MicroGiGaCN connector family. The addition of a mezzanine,
right-angle socket that’s intermateable with the series’ stacking plug enables
the use of standard FR-4 material to transfer differential signals of 3.125Gbps
and above with no more than 4% crosstalk at 50ps rise time.
Read More |
Read Press Release |
Get Datasheet
microGiGaCN® I/O Jack Evaluation Test Board Kits are Now Available
Fujitsu Components now offers microGiGaCN® I/O Jack 4x and 12x evaluation test board kits. Click on the datasheet link
below to access detailed information. To order your kit, please contact one of our sales offices closest to you from our
'Where to Buy' page.
Get Datasheet |
Contact Sales Office
Fujitsu Connector Tapped for InfiniBand I/O Standard
In an effort to bring processor speeds and I/O performance into
balance, the InfiniBand Trade Association has chosen Fujitsu Components' MicroGigaCN as the standard I/O
interface. Utilizing a 2.5Gbit/sec wire speed connection with eight or twenty-four pairs, the MicroGigaCN offers
a cost-effective I/O solution for high-speed data and telecommunications applications.
Read More |
Get Press Release |
Get Datasheet
The Micro Giga Connector Meets High-Speed Requirements
With the break-neck transmission speeds of
today's networks, designing systems that meet current speeds, yet offer a pathway
to next-generation equipment, can be a real challenge. To offer designers
flexibility for the future, Fujitsu Components has introduced its new high-density
Micro-Giga connector series, which supports data transfer rates up to 5 GB/sec (2.5GHz)
with less than 3% forward crosstalk at 100 pico second pulse-rise time (4 pairs
switching).
Read More | Get Press Release | Get Datasheet
Stacking Matched-Impedance Connectors Keep Crosstalk in Check
Speed requirements for next-generation datacom, telecom, instrumentation,
medical and computer equipment continue to increase thanks to ever-rising data transfer rates.
These devices also continue to shrink in size. What's the answer? High-density matched impedance
connectors that control crosstalk and offer design flexibility.
Read More |
Get Press Release |
Get Datasheet
We're In the News!
Take a moment to click
here and read an article from EBN Online titled
"Network needs driving high-speed connectors". As the article says, "Conventional connectors do not support the
speed and signal-integrity requirements of (high-speed) applications. By implementing a connector specifically
for high-speed, high-density, board-to-board differential applications, designers
can take advantage of a differential interconnect instead of more costly fiber-optic
or coax alternatives."
Low Voltage Connector Intro'd for 3.3V PC Cards
If you're designing any type of mobile or wireless product with a PC
card application, you probably need low-voltage components to conserve battery power. Look no further --
Fujitsu Components' new, low-voltage PC Card connector accommodates 3.3V Type I, II or III PC cards.
Read More |
Select Datasheet
Cardbus Connector
Bring high-bandwidth PC Card applications to your
small form-factor computing designs with Fujitsu Components' new CardBus connector. The 68-position
FCN-560H CardBus connector supports 32-bit, 33 Mhz operation in a variety of
devices such as notebook PCs, digital cameras, portable medical and test
equipment, and handheld devices. With the addition of the CardBus header,
Fujitsu's PC Card connector line is one of the broadest available.
Read More
| Get Datasheet
Industry-Standard Connectors
Need connectors that meet industry standards? Then
you’re in the right place. FCAI offers an impressive line-up of connectors for the
most popular standards and in a dizzying array of configurations. Don’t believe us?
Go ahead. Check out our standard list and click to the accompanying data sheets.
Read More
FCN290H Cuts Cross-Talk
If you're concerned about line noise and crosstalk in your compact,
high-speed devices, then our matched-impedance FCN-290H series may provide the solution you need. A series
of wide ground blades shield signal terminals from adjacent lines, resulting in 50 ohms matched impedance in
systems operating at up to 600 MHz, and crosstalk of 1.47% near end and 1.37% far end at 300MHz. How do you
like those numbers?
Read More
| Get Datasheet
|
